View AS176-59_1084922.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
AS176-59, AS176-59LF: GaAs IC High-Isolation Positive Control SPDT Switch 300 kHz-3 GHz
Features

Positive voltage control (0/3 to 5 V) High isolation (50 dB @ 0.9, 1.9 GHz) Low DC power consumption Ideal for cellular, GSM, DCS,PCS, 3G and 2.4 GHz ISM applications Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 C per JEDEC J-STD-020
Pin Out
V1 V2 J1 CBL GND CBL J3 4 5 3 N/C CBL = 47 pF. 6 CBL J2 GND 1 2 8 7
Description
The AS176-59 is a GaAs FET IC SPDT switch packaged in an MSOP-8 plastic package for low-cost, high-isolation commercial applications. It is an ideal building block for base station dualband applications where synthesizer isolation is critical. Use in conjunction with the AS165-59 SPST switch to meet GSM synthesizer isolation requirements.
NEW
Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging.
Electrical Specifications at 25 C (0, 3 V), (0, 5 V)
Parameter(1) Insertion loss(2) Condition Frequency 300 kHz-1.0 GHz 300 kHz-2.0 GHz 300 kHz-2.5 GHz 300 kHz-3.0 GHz J1-J2/J1-J3 J1-J2/J1-J3 300 kHz-1.0 GHz 300 kHz-2.0 GHz 300 kHz-2.5 GHz 300 kHz-3.0 GHz 300 kHz-1.0 GHz 300 kHz-2.0 GHz 300 kHz-2.5 GHz 300 kHz-3.0 GHz 300 kHz-2.0 GHz 300 kHz-3.0 GHz 45/50 41/38 29 22 45/50 47 36 30 Min. Typ. 0.7 0.8 0.8 0.9 50/55 45/42 34 27 50/55 52 40 35 1.3:1 1.5:1 1.5:1 1.8:1 Max. 0.9 1.0 1.1 1.2 Unit dB dB dB dB dB dB dB dB dB dB dB dB
Isolation(3)
Isolation(4)
J1-J2/J1-J3
VSWR(5)
1. All measurements made in a 50 system, unless otherwise specified. 2. Insertion loss changes by 0.003 dB/C. 3. Pin 4: N/C. 4. Pin 4: GND. 5. Insertion loss state.
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com
200174 Rev. C * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * August 2, 2006
1
DATA SHEET * AS176-59, AS176-59LF
Operating Characteristics at 25 C (0, 5 V)
Parameter Switching characteristics Rise, fall On, off Video feedthru Intermodulation intercept point (IP3) Condition 10/90% or 90/10% RF 50% CTL to 90/10% RF TRISE = 1 ns, BW = 500 MHz Two-tone input power 5 dBm VCTL = 3 V VCTL = 5 V VLOW = 0 to 0.2 V @ 20 A max. VHIGH = 3 V @ 100 A max. to 5 V @ 200 A max. 0.5-3 GHz 0.5-3 GHz Frequency Min. Typ. 60 100 50 41 45 25 Max. Unit ns ns mV dBm dBm C/W
Thermal resistance Control voltages
Typical Performance Data (0, 5 V)
0 -0.2 2.0 1.8
Insertion Loss (dB)
-0.4
VSWR (dB)
1.6 1.4 1.2 J1-J3 1.0 0 0.5 1.0 1.5 2.0 2.5 3.0
-0.6 -0.8 -1.0 -1.2 0 0.5 1.0 1.5 2.0 2.5 3.0 J1-J3 J1-J2
J1-J2
Frequency (GHz)
Frequency (GHz)
Insertion Loss vs. Frequency
-20 -25 -30 -35 -40 -45 -50 -55 -60 -65 -70 0 0.5 1.0 1.5 2.0 2.5 3.0 J1-J3 J1-J2 -20 -25 -30 -35 -40 -45 -50 -55 -60 -65 -70 0 0.5
VSWR vs. Frequency
Isolation (dB)
Isolation (dB)
J1-J2 J1-J3
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
Frequency (GHz)
Isolation vs. Frequency Pin 4: N/C
Isolation vs. Frequency Pin 4: GND
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 2
August 2, 2006 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200174 Rev. C
DATA SHEET * AS176-59, AS176-59LF
Truth Table
V1 0 VHIGH V2 VHIGH 0 J1-J2 Isolation Insertion loss J1-J3 Insertion loss Isolation
Absolute Maximum Ratings
Characteristic RF input power Value 1 W max. for f > 500 MHz 100 mW for f < 500 MHz VCTL = 0/8 V 8V -0.2 V, +8 V -40 C to +85 C -65 C to +150 C
All other conditions not recommended. VHIGH = 3 V to 5 V.
Supply voltage Control voltage
MSOP-8
0.0256 (0.65 mm) Typ. Pin 1 Indicator
Operating temperature Storage temperature
0.118 (3.00 mm) 0.004 (0.1 mm) SQ.
0.193 (4.90 mm) Ref.
Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty.
Pin 1
0.012 (0.30 mm)
+ 0.006 (0.15 mm) - 0.002 (0.05 mm)
0.038 (0.95 mm) 0.030 (0.75 mm)
7.0 Typ. 0.017 (0.43 mm)
0.007 (0.18 mm) 0.005 (0.12 mm)
8.0 Max.
CAUTION: Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times.
0.006 (0.15 mm) 0.002 (0.05 mm)
0.028 (0.70 mm) 0.016 (0.40 mm)
Recommended Solder Reflow Profiles
Refer to the "Recommended Solder Reflow Profile" Application Note.
Tape and Reel Information
Refer to the "Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation" Application Note.
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com
200174 Rev. C * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * August 2, 2006
3
DATA SHEET * AS176-59, AS176-59LF
Copyright (c) 2002, 2003, 2004, 2005, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and "Breakthrough Simplicity" are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 4
August 2, 2006 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200174 Rev. C

▲Up To Search▲

Price & Availability of AS176-59

	To Download AS176-59 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .